Verilink WANsuite 5330 (34-00302.F) Product Manual Uživatelský manuál stáhnout pdf (Strana 131)

SNMP Agent B-1

A PPENDIX

PPEN DIX

SNMP A

GENT

Introduction

This chapter provides specific information for configuring and using the

SNMP agent within the WANsuite 5330.

The WANsuite 5330 incorporates an Ethernet card that provides connectivity

for LAN-based management stations. The embedded TCP/IP Protocol Stack

allows remote access from both private networks and the Internet.

SNMP Configuration Parameters

To access the SNMP agent, you must have an SNMP management

application, such as HP’s OpenView

or Sun’s NetManager . Access to the

agent is controlled by three community strings: read-access, write-access, and

trap-access (the community string sent with an SNMP trap). Configuration of

these community strings within the WANsuite 5330 is accomplished via the

HTTP (Web browser) interface (Chapter 3, Web Server Interface) or the

VT100 interface (Chapter 4, VT100 Interface).

The defaults for these strings are “public” for read-access, “private” for write-

access, and “public” for trap-access. Ensure that your SNMP management

application is configured for whatever access strings you use.

SNMP MIBs

The WANsuite 5330 supports the following industry-standard MIB

(management information base) files:

• rfc1907.mib − SNMPv2 entities (initial revision published as RFC 1450)

• rfc1573.mib − defines the IANAifType textual convention, and thus the

enumerated values of the ifType object defined in MIB-II’s

ifTable

1 2 ... 126 127 128 129 130 131 132 133 134 135

Žádné komentáře

Verilink WANsuite 5330 (34-00302.F) Product Manual Uživatelský manuál Strana 131