Verilink WANsuite 6x30 (34-00315.B) Product Manual Uživatelský manuál Strana 46

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 181
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 45
3-18
WANsuite 6x30
in a particular 15-minute collection interval reaches/exceeds this value, a trap
is generated. One trap will be sent per interval per endpoint.
UAS
Sets the threshold for the number of Unavailable Seconds within any given
15-minute performance data collection interval. If the value of UAS in a
particular 15-minute collection interval reaches/exceeds this value, a trap is
generated. One trap will be sent per interval per endpoint.
NOTICE:
Any changes to the above-listed parameters must be followed by a
“Submit” for the changes to take effect.
Span Endpoints Screen
Clicking on the “Span Endpoints” button on the WANsuite 6430 Network
screen will display the screen shown in Figure 3.15.
Figure 3.15
Span Endpoints Screen
This screen displays each side of the span, with the local side displayed first.
If the SHDSL link is not up, only the local side of the span is displayed. The
EOC channel is used to access the remote end unit
Clicking on the highlighted (linking) Type identifier in the table on the Span
Endpoints screen will display the Span Endpoints Details screen (Figure 3.16).
This table supports retrieval of unit inventory information available via the
EOC from units in an SHDSL line, and provides details regarding the
parameters listed below.
Zobrazit stránku 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 180 181

Komentáře k této Příručce

Žádné komentáře