Verilink WANsuite 7205 (34-00317.B) Product Manual Uživatelský manuál stáhnout pdf (Strana 83)

Web Server Interface 3-53

Bit Errors

Displays the total number of bit errors detected since the test began or since

error statistics were cleared.

Errored Seconds

Displays the number of asynchronous errored seconds detected since the test

began or since error statistics were last cleared.

%EFS

Displays the percentage of time the test ran error-free. This ratio is derived

from the number of error-free seconds divided by the number of seconds

accumulated in Elapsed Time.

Loop Table on the Serial Interface Test Details Screen

The Loop Table at the bottom of the screen lets you specify the type of Loop

test to be performed. The types of tests available for the Serial interface are

shown below. Loopback diagrams are illustrated in Appendix A, Figure A.1.

Values: No Test, Port Loop, V.54 Loop, Far V.54 Loop

Default: No Test (Loop Down)

The Test Details screens provide the following user-activated buttons:

Trap Log Screen

A trap is a mechanism that permits a device to send an alarm for certain

network events to an SNMP management station. The Trap Log screen

(Figure 3.42) shows all traps that have been generated.

The table shown in this screen lists each trap by its Index number, and

displays the type of error captured by the trap (Trap Number), the date and

time that the trap was stored (Time Stamp), its description, and its value.

Click the “Refresh” button at the top of the screen to display the latest trap

information in the table. To remove all trap information stored in memory,

click the “Delete All Traps” button.

Button Function

Start Starts the specified BERT.

Stop Stops the currently running BERT.

Error Inject Injects a bit error.

Reset Errors Resets the current error count.

Submit Sets the type of Loop test.

Refresh Refreshes data on the current page.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 220 221

Žádné komentáře

Verilink WANsuite 7205 (34-00317.B) Product Manual Uživatelský manuál Strana 83