Verilink Access Manager 2000 (896-502037-001) Product Manua Uživatelský manuál Strana 213

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 400
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 212
Configuration Options for AS2000 and ConnecT1 Plus
Access Manager 2000 User Manual
5
-
89
Then, press to go to the Loopback Enable screen, and enable each
desired loopback by typing Y. All loopbacks are enabled by default.
Figure 5-15 Loopback Enable Sub-menu
To allow the CSU to do any of the following:
Send or respond to inband loopback codes
Apply a test signal to a DS1 circuit when commanded by Access
Manager via the On-line Menu
Apply a test signal to a DS1 circuit when commanded by local
switch controls at the circuit element
Execute the following steps:
1. Set the Enable Testing Options field to YES.
2. Press to access the following screen.
3. Select a framed or unframed test signal.
Set the Enable Testing Options field to NO (disabled) to:
use external test equipment, or
prevent unauthorized circuit testing through the CSU
F8
Enable Testing
Options
F8
INBAND LOOPBACK CODES and TEST SIGNALS SUB-MENU:
Zobrazit stránku 212
1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 399 400

Komentáře k této Příručce

Žádné komentáře