Verilink ConnecT 56K DSU (896-502110-001) Product Manual Uživatelský manuál stáhnout pdf (Strana 28)

Installation

2-12

ConnecT 56K DSU User Manual

If verbose responses are disabled (ATV0), the 3 character responses listed

below are the only ones returned:

The syntax and possible responses

Following is a list of V.25 bis commands and their possible responses.

CIC Connect Incoming Call:

This command causes the DSU to go online. There are no parameters

associated with this command. Possible indications include: VALA,

CNX, CFIxx

CNL Local Configuration:

This command is used to pass AT commands to the local modem via the

V.25 bis command processor. This allows the ConnecT 56K DSU to be

configured with AT commands via a synchronous interface. The format

of this command is:

CNL[LOCAL PASSWORD];AT[ONE OR MORE AT COMMANDS]

The local password may or may not be required depending on the present

configuration of the unit. Responses to CNL commands are returned in

the data format currently configured. Possible responses include: VALA

and INVAn.

CNR Remote Configuration:

This command is used to pass AT commands over the network to the

remote DSU via the V.25 bis command processor. This allows a remote

ConnecT 56K DSU to be configured from a synchronous interface. The

format of CNR this command is:

CNR[REMOTE PASSWORD];AT[ONE OR MORE AT COMMANDS]

VAL Valid V.25 command pro-

cessed

INV Invalid command received

CFI Call failed

INC Incoming call

CNX Call connected

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 87 88

Žádné komentáře

Verilink ConnecT 56K DSU (896-502110-001) Product Manual Uživatelský manuál Strana 28