Verilink FrameStart FSD (34-00291.F) Product Manual Uživatelský manuál stáhnout pdf (Strana 29)

Operation 23

MAIN MENU ALARMS NETWORK: OK

LOSS, 5

OOSS, 5

BPVS, 0

FR NET

‡

: OK, LOCAL, SOS, DLCI

RESET TIMER: 000 – 900, 30

RESET ALARMS?

PERFORMANCE NET PERFORMANCE RCV LVL: 0.0 dB, 7.3 dB, 13.6 dB, 19.7 dB, 26.0 dB,

32.3 dB, 38.4 dB, 44.4 dB, 50.5 dB

LOSS

OOSS

BPVS

CLEAR HISTORY?

FR PERFORMANCE LMI TYPE: ORIG, ANSI D, ITU A

PCKT SRC: UNI, NI

DLCI TOTAL: 000–999

†

DLCI Screen

CLEAR DLCI? TEST DLCI xxx?

‡

MAINTENANCE LOOP: NONE?, ENABLE LLB?, ENABLE DLB?, ENABLE LCL

ENABLE V54?, ENABLE RMT V54?, ENABLE RMT DLB

BERT: NONE,

EN. NET BERT? TP: MARKS, SPACES, 511, 2047

EN. DTE BERT? INJECT ERROR?

ERR CNT = 00000–65356

CLEAR ERR CNT?

DTE CONFIG RATE: 56 Kbps, 64 Kbps

DTE CLOCK: NOR, INV

TXCC CLOCK: EN, DIS

DTE DATA: NOR, INV

CTS: NORMAL, FORCED ON

CTS DELAY: 000–255

DCD: NORMAL, FORCED ON

DSR: NORMAL, FORCED ON

DTR: NORMAL, IGNORED

FRAME RLY CONFIG LMI MODE: OFF, ON, MON

‡

UNIT ID: 000 – 999

N391: 001–255, 006

N392: 01–10, 03

N393: 01–10, 04

T391: 05–30, 10

PVC MODE: DIS, EN

SOS TX: EN, DIS

‡

SOS RX: EN, DIS

‡

UTILITIES VERSION: z.zz

RESTORE FACTORY?

SET PASSWORD

Figure 4.2

DDS CSU/DSU Menutree

The three-digit current and threshold values (###/###)

range from 000 to 900. An asterisk (*) to the left of these

values indicates that the current value has exceeded the

threshold value. Pressing SELECT on a displayed alarm

allows editing the threshold parameters for that alarm.

The values are shown as (sss/ttttt). The 15-

minute current value (sss) ranges from 000

to 900. The 24-hour total values (ttttt) range

from 00000 to 65535.

† (Install mode only) If the DLCI TOTAL is greater than

000, a screen with the following format appears when

SELECT is pressed:

uuuu -> vvvv:www

xxxxms yyyykbps

uuuu - the local DLCI number

vvvv - ACT., IDLE, NEW, DEL., or REMOTE DLCI (if

discovered)

www - remote unit ID

xxxx - average delay (if discovered)

yyyy - committed information rate

This field establishes the unit password used for entering

the front panel interface. A password must be eight

characters. SCROLL increments the characters (0–9, A–

Z, a–z). The cursor blinks over the character or digit to be

selected or modified. SELECT accepts the current value

and moves the cursor right. When the eighth character is

selected, a verification screen appears. Reenter the

password.

‡ Monitor option only

This does not apply to frame relay alarms.

Default values are shown in bold.

The network configuration is automatically set when the

DTE Rate is set. For example, 56 Kbps DTE Rate sets the

network to DDS I and 64 Kbps DTE Rate sets the network

to DDS II CC 64K.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 48 49

Komentáře k této Příručce

Žádné komentáře

Verilink FrameStart FSD (34-00291.F) Product Manual Uživatelský manuál Strana 29

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Verilink FrameStart FSD (34-00291.F) Product Manual