Verilink FrameStart FSD (34-00291.F) Product Manual Uživatelský manuál stáhnout pdf (Strana 30)

24 DDS CSU/DSU and T1 CSU/DSU and FrameStart FSE

MAIN MENU ALARMS NETWORK: OK

LOSS

OOFS

AISS

RAS

SES

BES

UAS

BPVS

CSS

CRCES

FR NET

‡

: OK, LOCAL SOS, DLCI

RESET TIMER: 000 – 900, 30

RESET ALARMS?

PERFORMANCE NET PERFORMANCE RCV LVL: 2 – 7.5 dB, 7.5 – 15 dB, 15 – 22.5 dB, <22.5 dB

LOSS

OOFS

AISS

RAS

SES

BES

UAS

BPVS

CSS

CRCES

CLEAR HISTORY?

FR PERFORMANCE LMI TYPE: ORIG, ANSI D, ITU A

PCKT SRC: UNI, NI

DLCI TOTAL: 000–999

†

CLEAR DLCI? DLCI Screen

TEST DLCI xxx

‡

MAINTENANCE LOOP: NONE?, ENABLE LLB?, ENABLE PLB?, ENABLE V54?,

ENABLE RMT V54?, ENABLE RMT LLB?, ENABLE RMT PLB?

BERT: NONE,

EN. NET BERT? TP: MARKS, SPACES, 511, 2047

EN. IDLE BERT? INJECT ERROR?

EN. DTE BERT? ERR CNT = 00000–65356

EN. CH01–CH24 BERT? CLEAR ERR CNT?

NETWORK CONFIG FRAMING: D4, ESF

LINE CODE: AMI, B8ZS

CLOCK SRC: NET, INT

SENSITIVITY: DIS, EN

LBO: 0 dB, −7.5 dB, −15 dB, −22.5 dB

YEL ALARM: EN, DIS

DENSITY: EN, DIS

FDL: NONE, ANSI, AT&T

CHANNELS: CONT, ALT

START CHAN: 01 – 24

#CHANNELS: 00 – 24

DTE CONFIG RATE: 56 Kbps, 64 kbps

DTE CLOCK: NOR, INV

TXCC CLOCK: EN, DIS

DTE DATA: NOR, INV

CTS: NORMAL, FORCED ON

DCD: NORMAL, FORCED ON

DSR: NORMAL, FORCED ON

DTR: NORMAL, IGNORED

FRAME RLY CONFIG LMI MODE: OFF, ON, MON

‡

UNIT ID: 000 – 999

N391: 001–255, 006

N392: 01–10, 03

N393: 01–10, 04

T391: 05–30, 10

PVC MODE: DIS, EN

SOS TX: EN, DIS

‡

SOS RX: EN, DIS

‡

UTILITIES VERSION: z.zz

RESTORE FACTORY?

SET PASSWORD

The three-digit current and

threshold values (###/###)

range from 000 to 900. An

asterisk (*) to the left of these

values indicates that the

current value has exceeded

the threshold value. Pressing

SELECT on a displayed alarm

allows editing the threshold

parameters for that alarm.

* This field establishes the unit password used for

entering the front panel interface. A password

must be eight characters. SCROLL increments

the characters (0–9, A–Z, a–z). The cursor

blinks over the character or digit to be selected

or modified. SELECT accepts the current value

and moves the cursor right. When the eighth

character is selected, a verification screen

appears. Reenter the password.

The values are shown

as (sss/ttttt). The

15-

minute

current value (sss)

ranges from 000 to

900. The 24-hour total

values (ttttt) range

from 00000

to 65535.

Figure 4.3

T1 CSU/DSU Menutree

† (Install mode only) If the DLCI TOTAL is

greater than 000, a screen with the following

format appears when SELECT is pressed:

uuuu -> vvvv:www

xxxxms yyyykbps

uuuu - the local DLCI number

vvvv - ACT., IDLE, NEW, DEL., or REMOTE

DLCI (if discovered)

www - remote unit ID

xxxx - average delay (if discovered)

yyyy - committed information rate

‡ Monitor option only

§ This does not apply to frame relay alarms.

Default values are shown in bold.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 48 49

Komentáře k této Příručce

Žádné komentáře

Verilink FrameStart FSD (34-00291.F) Product Manual Uživatelský manuál Strana 30

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Verilink FrameStart FSD (34-00291.F) Product Manual