Verilink WANsuite 7105 (34-00316.C) Product Manual Uživatelský manuál Strana 115

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 255
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 114
Web Server Interface 3-83
Figure 3.78
NAT Port Table Screen
Endpoint
The Endpoint name of the circuit associated with the LAN or WAN port.
Default is LAN for the first port.
Enable
Enables or disables the NAT port. Default is “Enable.”
Default Translation
Forces translation on a specific IP port regardless of the source IP Address. If
Default Translation is set to “Enable,” the packet will never be discarded, but
will always pass through the translation path. Therefore, any packets with a
destination address different from the global/Internet network address will be
processed by the IP Gateway, and may be routed to another port. If this
parameter is set to “Disable,” no packet with a destination address different
from the global/Internet address will be processed. Setting this parameter to
“Disable” will override an “Enable” parameter set under “Filter Non Local
Address” on the NAT Details menu.
Type
Defines whether this port is local or global. Default is LAN global. All others
are local.
IP Address
IP Address of this port. Default is the value defined in the IP Gateway Circuit
Table.
Mask
Mask related to the defined IP Address. Default is the value defined in the IP
Gateway Circuit Table.
The NAT Port Table screen provides an “Add New” button that lets you add
additional addresses.
Figure 3.79
NAT Port Details Screen
Zobrazit stránku 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 254 255

Komentáře k této Příručce

Žádné komentáře