
DIDCSU T1 Version
3-30
Verilink DIDCSU 2912 User Manual
Figure 3-20 Display Alarm Buffer
When finished reviewing the alarm information, enter “X” to return
to the
Main Menu
.
Building Circuits—Circuit Manager Menu
To access the
Circuit Manager Menu
from the
Main Menu
, enter
“B”.
Use the
Circuit Manager Menu
to build and maintain logical
connections between ports within a node. The port can be a T1 or
data port. T1 port bandwidth is set using a number of timeslots, 1-
24. The bandwidth for each DS0 is set to 56 kbit/s or 64 kbit/s.
NOTE:
Each circuit must include a minimum of one network port
(circuits are not supported from data port to data port).
Figure 3-21 Circuit Connections
•
The port line code selection (for example, 56 kbit/s or 64
kbit/s circuits) can limit a circuit’s available bandwidth.
•
Network and data ports must be
In Service
before being
included in a circuit.
•
When you have named a circuit and identified its source and
destination ports, allocate its source and destination
timeslots.
•
If a card is moved to a different slot all circuits in that card are
discarded when it powers up in a different numbered slot.
[1,1] DIDCSU 2912 > o
[1,1] DIDCSU 2912 > o[1,1] DIDCSU 2912 > o
[1,1] DIDCSU 2912 > o
DIDCSU 2912 [1,1] AIS Minor Alarm port 1 8-09-96 18:38:35
DIDCSU 2912 [1,1] AIS Minor Alarm port 1 8-09-96 18:38:35DIDCSU 2912 [1,1] AIS Minor Alarm port 1 8-09-96 18:38:35
DIDCSU 2912 [1,1] AIS Minor Alarm port 1 8-09-96 18:38:35
DIDCSU 2912 [1,1] AIS Threshold Cleared port 1 8-09-96 18:37:17
DIDCSU 2912 [1,1] AIS Threshold Cleared port 1 8-09-96 18:37:17DIDCSU 2912 [1,1] AIS Threshold Cleared port 1 8-09-96 18:37:17
DIDCSU 2912 [1,1] AIS Threshold Cleared port 1 8-09-96 18:37:17
Press enter to continue
Press enter to continuePress enter to continue
Press enter to continue
Net 1Data 1
Net 2Data 2
A
B
A. Data to T1
B. T1 to T1
Komentáře k této Příručce