Verilink 8100A (34-00237) Product Manual Uživatelský manuál stáhnout pdf (Strana 149)

Configuration 4-75

If MGCP configuration is not correct, the IAD displays a message warning

you that the configuration is invalid and initialization is incomplete.

Debug MGCP

The use of this option is reserved for Verilink network engineers only.

Enabling debug options may significantly affect IAD performance.

Remove a Connection

1 Type “R” on the MGCP Management menu (Figure 4.88) to remove a lost

connection.

2 Type the number of the Connection ID to delete and press Enter.

Port Administration

Type “A” on the MGCP Management menu to (Figure 4.88) to display the

Port Administration menu (Figure 4.90).

Figure 4.90

Port Administration Menu

NOTICE: These options are only available when you log in at the Network

Administrator or Supervisor levels.

Set Admin State for All Ports

1 Type “1” on the Port Administration menu (Figure 4.90) to enable or

disable the admin state for all ports.

2 Type “E” to enable the admin state, or “D” to disable it. The IAD saves the

mode you’ve selected and redisplays the Port Administration menu.

3 Press Escape to return to the Voice Configuration menu and continue with

other voice path configuration.

Display Current Admin State

To display the Current Admin State, follow the steps below.

1 Type “2” on the Port Administration menu (Figure 4.90) to display the

current admin state by port number. The IAD displays the report:

2 Press any key to return to the Port Administration menu.

Configure Admin State per Port

To configure the Admin State per port, follow the steps below.

1 Type “3” on the Port Administration menu (Figure 4.90) to enable or

disable the admin state for a specific port. The IAD prompts you to enter a

port.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 310 311

Žádné komentáře

Verilink 8100A (34-00237) Product Manual Uživatelský manuál Strana 149