Verilink 8100A (34-00237) Product Manual Uživatelský manuál stáhnout pdf (Strana 34)

1-8 8000 Series

High POTS Port Rear Panel Connectors

The High POTS Port rear panels have the following connectors: 10/100 LAN,

CONSOLE

, T1 (or DSL, depending on model), DCE V.35/RS-530 (USI),

BATTERY BACKUP

, Voice Lines, LIFE LINE, On/Off Switch, and AC POWER

INPUT.

Each of these is described below. Each unit also has a Ground, a

typical

diagram of which is shown in Figure 2.1.

Figure 1.8

T1/E1 High POTS Port Rear Panel Connectors

Figure 1.9

SDSL and SHDSL High POTS Port Rear Panel Connectors

10/100 LAN

(10/100Base-T

Ethernet Port)

Connects the IAD to the local area network using a CAT-5 straight-through

Ethernet cable, or directly to a PC for accessing via Telnet (using a

cross-over, customer-supplied cable). The data interfaces connect through the

IAD supporting IEEE 802.1-compliant bridging and routing. When configured

for routing, supports Routing Information Protocol (RIP) version 1, version 2,

or static IP routing. The IAD complies with RFC-1812 when interfacing with

IPV4 routers. The IAD can terminate the following data interfaces:

• ATM data transport via SHDSL, SDSL, and T1/E1 per RFC 1483 or RFC

2364

• Frame Relay data transport via SDSL and T1/E1 per RFC 1490

DCE LINK Illuminates when there is a link between the IAD and data

communications equipment (DCE).

DCE ACT Illuminates or blinks when there is activity on the DCE link.

LED Description

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 310 311

Žádné komentáře

Verilink 8100A (34-00237) Product Manual Uživatelský manuál Strana 34